1. Newton Guide To Waterproofing
COMPLETE WATERPROOFING SOLUTIONS FOR NEW AND EXISTING STRUCTURES, Basement Waterproofing, Deck Waterproofing, Tunnel Waterproofing, Historic Building Waterproofing

Published [06/12/2019]File size [7850 KB]

1. Newton Waterproofing Product Catalogue 2021
The complete product guide for all structural waterproofing project requirements

Published [07/10/2021]File size [14351 KB]

2. The Newton Waterproofing Index
Waterproofing

Published [16/07/2018]File size [4286 KB]

3. Newton Membrane Recycling Service

Published [07/11/2017]File size [1378 KB]

4.Tanking a cellar in a new build house Case study
Case study - rectifying water ingress with the Newton CDM System, internal cavity drainage membrane systems

Published [13/07/2018]File size [3848 KB]

5.Newton Waterproofing Product Directory Systems March 2016
Cavity Drainage Basement Tanking Basement Waterproofing Tanking Waterproofing membranes DPC radon protection

Published [27/10/2017]File size [4118 KB]

DampSafe 809-HP DPC Data Sheet 2.0
High Load Physical Damp Proof Courses. DampSafe 809-HP DPC is a high-performance polymeric DPC which will not extrude under load, up to the point of compressive failure of the wall.

Published [16/10/2020]File size [802 KB]

GUIDE Waterproofing An Existing Basement 8 May 2013
Newton Basement Waterproofing

Published [10/11/2015]File size [1326 KB]

Newton 103 S Liquid Waterproofing Membrane TDS 4.0-1
High Performance Liquid Waterproofing Membranes. Two-component, thixotropic, cementitious modified polymer waterproofing membrane with high adhesion, designed for the internal and external waterproofing of concrete and steel elements of water-retaining and water-resisting structures such as reservoirs, water tanks, below ground structures, podium decks, and parking areas.

Published [07/10/2021]File size [1511 KB]

Newton 104 Waterproofing of Concrete Data Sheet 1.3-1
Crystalline Waterproofing of Concrete

Published [07/10/2021]File size [1278 KB]

Newton 105 Cementitious Waterproofing TDS 1.1
Cementitious Waterproofing Slurry and Mortar

Published [07/10/2021]File size [568 KB]

Newton 106 FlexProof Polymer Waterproofing TDS 2.3-1
Flexible Polymer Waterproofing compound for the waterproofing of construction and movement joints.

Published [07/10/2021]File size [1271 KB]

Newton 107F Waterproofing Membrane TDS 4.0.
A two-component, cementitious, polymer-rich coating for the waterproofing and protection of concrete and masonry. Capable of withstanding heads of water pressure up to 10 bar of positive pressure and up to 1.5 bar to the negative side of the structure. Waterproofing of reservoirs, tunnels, water tanks, earth-retaining structures and covered or buried decks. Cementitious Flexible Waterproofing Membranes

Published [07/10/2021]File size [2741 KB]

Newton 108 HydroBond Waterproofing Membrane LM TDS 5.5
Highly radon resistant, cold and spray-applied seamless rubber waterproofing membranes for the external waterproofing of basements (including covered decks) and foundation walls.

Published [07/10/2021]File size [1340 KB]

Newton 109 Waterproofing Membrane LM TDS 4.7
A radon gas certified, flexible, single-component, cold-applied, seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls. Liquid waterproofing Membranes.

Published [07/10/2021]File size [1435 KB]

Newton 110 WATstop Waterproofing Mortar & Slurry TDS 4.5
A three-component, fibre-reinforced cement/epoxy mortar for surface repair and surface smoothing. Epoxy-Cement Waterproofing Coatings (Water Barriers) Epoxy-Cement Waterproofing Mortars and Slurry

Published [02/12/2021]File size [530 KB]

Newton 203 Repair Mortar Data Sheet 1.4
Single component, fast setting, Portland cement based structural mortar. Rapid Set and High Strength Repair Mortars. Concrete Repair mortars.

Published [07/10/2021]File size [764 KB]

Newton 301 EasyProof Data Sheet 1.2
Metal Construction Joint Waterbars. Coated metal waterbar system used for the sealing of kickerless construction joints within retained concrete structures.

Published [07/10/2021]File size [462 KB]

Newton 302 Injection Hose Tech Data Sheet 2.0
a high-performance waterbar system used for the sealing of construction joints within earth retained and water retaining concrete structures. Waterbars.

Published [15/10/2021]File size [1367 KB]

Newton 305 ActiveJoint Data Sheet 2.0
Movement Joint Profiles.

Published [15/10/2021]File size [251 KB]

Newton 306 LeakSeal Tech Data Sheet 4.0
Fast-curing, swelling, single-component, polymeric adhesive sealant. Swelling Adhesive Mastics.

Published [15/10/2021]File size [325 KB]

Newton 308 Stopaq Tech Data Sheet 3.1
A single component highly flexible compound used for the sealing of service sleeves against penetration of ground water and gasses within or around the service sleeve. Service Duct Waterproofing, Service Duct Sealants.

Published [15/10/2021]File size [925 KB]

Newton 309 Adhesive Mastic TDS 1.0
MS-polymer based, durable and fast curing elastic adhesive. Adhesive Mastics.

Published [15/10/2021]File size [235 KB]

Newton 313 Water Plugs Tech Data Sheet 4.1
Waterplugs. Fast Setting Polymer Compound that instantly stops running water or seepage through masonry or concrete substrates.

Published [15/10/2021]File size [269 KB]

Newton 314 Bentonite Granules Tech Data Sheet 4.0
Swelling Detailing Powder, Detailing Bentonite Granules for the Newton HydroBond System.

Published [15/10/2021]File size [334 KB]

Newton 315 Polymer-Waterbar Tech Data Sheet 1.7
Polymer Waterbars, Swelling Waterbars. hydrophilic, acrylate polymer waterbar which swells when activated by moisture.

Published [15/10/2021]File size [566 KB]

Newton 320 Flexible Polyurethane TDS 1.0
Newton 320-FP is a two-part, low-viscosity, fast foaming, polyurethane injection resin that reacts with water to form a rigid and hydrophobic seal against water ingress and is one of a range of injection resins that form the Newton ReSeal System for the sealing of water leaks and to seal voids and cracks to prevent water leaks.

Published [16/10/2020]File size [485 KB]

Newton 321 FSP Sealing Injection Resin TDS 1.0-1
A single-part, medium to low viscosity, MDI based injection resin that reacts with water, without the need for a catalyst, in order to form a flexible, closed-cell foam, or where no water is present forms a flexible polyurethane to seal water leaks through voids and non-structural cracks​. Flexible Foaming & Sealing Injection Resins.

Published [16/10/2020]File size [629 KB]

Newton 322 SP Sealing Injection Resin TDS 1.0
Flexible Sealing Injection Resins. Two-part, low-viscosity, MDI-based injection resin

Published [16/10/2020]File size [505 KB]

Newton 323 SA Sealing Injection Resin TDS 1.0
Flexible Acrylic Sealing Injection Resins

Published [16/10/2020]File size [509 KB]

Newton 324 SR Injection Resin TDS 1.1
high-performance, five-part resin that after injection by conventional packers, reacts to form a very durable and flexible acrylic-rubber that exhibits exceptional adhesion, ensuring the comprehensive sealing of water leaks in structures that are subject to settlement or movement. Crack Injection Waterbars, Waterstops, Waterplugs

Published [16/10/2020]File size [721 KB]

Newton 340 EcoClean TDS 1.0
Newton 340 EcoClean is an ecological cleaning agent specifically for flushing through and cleaning PU injection resin pumps both during and after the injection process.

Published [16/10/2020]File size [350 KB]

Newton 402 CCS-M Tech Data Sheet 1.0
Type A - Externally Applied Waterproofing Membrane

Published [15/10/2021]File size [505 KB]

Newton 403 HydroBond Tech Data Sheet 5.5
Externally Applied Waterproofing Membranes, Mechanical Bond to Poured Concrete BS 8102 Type A, Ground Gas Resistance BS 8485:2015 Incorporated

Published [15/10/2021]File size [548 KB]

Newton 408 DeckDrain Tech Data Sheet 2.2
Drainage Membranes for Decks and Flat Roofs

Published [15/10/2021]File size [262 KB]

Newton 409 RootBarrier Data Sheet 2.1
An impermeable High Density Polyethylene (HDPE) membrane, providing robust root-proof protection to the primary waterproofing membrane to green roofs or planters where intrusive root systems are present. Puncture Resistant Root Barrier Membranes.

Published [22/10/2021]File size [305 KB]

Newton 410 GeoDrain Tech Data Sheet 2.4
A two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water impermeable HDPE (High Density Polyethylene) drainage membrane. Externally Applied Drainage Membranes for Basements

Published [15/10/2021]File size [427 KB]

Newton 420 Reservoir Tech Data Sheet 2.2
Drainage and water-retention membrane for use where a water reservoir is required for extensive green roofs of sedum, herbaceous plants, mosses or grass above decks and roofs. Extensive Green Roof Drainage Membranes.

Published [15/10/2021]File size [540 KB]

Newton 503 3mm Cavity Drain Membrane Data Sheet 4.2
Cavity drain waterproofing membrane, supplied in a plain variant for walls and floors and a meshed variant for receiving plaster or render to walls, 3mm Cavity Drainage Membranes.

Published [16/10/2020]File size [903 KB]

Newton 503 Mesh BBA Certificate

Published [16/10/2020]File size [459 KB]

Newton 508 Cavity Drain Membrane TDS 9.1
Cavity Drainage Waterproofing Membranes

Published [16/10/2020]File size [900 KB]

Newton 520 eco Cavity Drain Membrane TDS 1.4
20 mm Cavity Drain Membrane

Published [16/10/2020]File size [1295 KB]

Newton 601 Slimline Data Sheet Aug 2016
Flooring Membranes used primarily for isolating moisture sensitive flooring from dampness in the floor slab. It can be used as the floor membrane as part of Newton System 500.

Published [16/10/2020]File size [227 KB]

Newton 603 Decoupling Mat for Tiling TDS 1.0
Newton 603 Tile is a composite decoupling mat for tiled or paved floors with an installation height of just 3mm. Tiling underlays.

Published [16/10/2020]File size [597 KB]

Newton 603 Flooring Membrane TDS 5.3
Flooring membrane suitable for use above new and existing floors. The 3mm studs allow for pressure equalisation of dampness within the floor below, allowing for dissipation at the room perimeter and subsequent drying of the floor. Damp proof flooring memebranes. Sports floor membranes.

Published [16/10/2020]File size [192 KB]

Newton 701 High Build Epoxy Resin TDS 4.1
High Build Epoxy Floor Coating providing protective and decorative properties to concrete, steel and other substrates. Epoxy floor coatings.

Published [15/10/2021]File size [731 KB]

Newton 801-M Mastic Sealant Data Sheet 1.1
Mastic Sealant for Damp Proofing Membranes

Published [15/10/2021]File size [286 KB]

Newton 802 Damp Proof Membrane TDS 1.2
BBA certified, 100% recycled Damp proof membrane. Loose-laid, low density polyethylene dampproof membrane for use below concrete floors or screeds. DPMs.

Published [15/10/2021]File size [407 KB]

Newton 803 Newtonite Damp Proofing Membrane TDS 7.3
Meshed Surface Composite Damp Proofing Membrane

Published [15/10/2021]File size [958 KB]

Newton 803 Non Mesh Damp Proofing Membrane Data Sheet 8.0
Non-Meshed Damp Proofing Membrane

Published [15/10/2021]File size [899 KB]

Newton 805 Newlath Data Sheet 3.2
Damp Proofing Membrane & Plaster Base

Published [15/10/2021]File size [522 KB]

Newton 806 Thermal Paint CWC Data Sheet 2.3
Thermal Paint, Anti Condensation Coatings

Published [16/10/2020]File size [357 KB]

Newton 807 BKK eco Data Sheet 2.2
Water Repellent Coatings

Published [16/10/2020]File size [329 KB]

Newton 901-P Pre-Primer For Porous Surfaces Tech Data Sheet 1.4
Newton 901-P is a two-part, solvent free, clear epoxy which is applied to damp and porous surfaces as a pre-primer prior to the application of Newton 902-P, a vapour barrier and primer for newly placed, or damp, concrete and screed.

Published [15/10/2021]File size [851 KB]

Newton 903-P Primer Data Sheet 2.3
Newton 903-P is a modified styrene/acrylic copolymer primer for concrete that is applied prior to the installation of Newton’s range of high performance cementitious waterproofing membranes, concrete repair and floor coating products.

Published [15/10/2021]File size [2466 KB]

Newton 905-CM Tech Data Sheet 1.2
Newton 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, that ensures the correct curing of concrete and cement based mortars and coatings.

Published [15/10/2021]File size [322 KB]

Newton 906 Lime Inhibitor Tech Data Sheet 2.2
Newton 906 Lime Inhibitor is applied to concrete surfaces prior to the installation of a Newton System 500 cavity drain membrane waterproofing system to prevent the ‘leaching’ of free lime from the concrete.

Published [15/10/2021]File size [202 KB]

Newton 908 LiquaBond Data Sheet 3.2
Newton 908 LiquaBond is a formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems where bond is increased significantly, and as a high performance admixture which waterproofs cement-based mixes.

Published [16/10/2020]File size [290 KB]

Newton 912-Reinforcement Tape Data Sheet 1.1
Newton 912-RT is a pun-bond, polypropylene reinforcement tape used with Newton liquid applied membranes and coatings to reinforce changes in direction and over cracks and static construction and day joints.

Published [15/10/2021]File size [231 KB]

Newton 914 Reinforcement Tape Data Sheet
Newton 914-RT is a non-woven polypropylene reinforcement tape used with Newton 108 HydroBond-LM and Newton 109-LM liquid applied membranes and coatings to reinforce detailing around protrusions such as service pipes and over static construction and day joints and covered movement joints

Published [15/10/2021]File size [725 KB]

Newton 916 FlexProof Primer TDS 1.1
Primer for 106 FlexProof liquid waterproofing membranes.

Published [15/10/2021]File size [276 KB]

Newton Basedrain Data Sheet 4.2
The drainage system used most commonly within the Newton CDM, ‘Type C’, cavity drain waterproofing system. Comprising a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage. Newton Floordrain drainage conduits.

Published [22/10/2021]File size [1690 KB]

Newton BS8102 Regulations Oct 2012

Published [27/10/2017]File size [564 KB]

Newton CDM Installation Manual 9.0
Newton CDM is a Type C waterproofing system that includes BBA Certified membranes, drainage channels, pumping systems and pumping ancillaries specifically designed for waterproofing earth retaining structures against water from the ground. Cavity Drain Waterproofing Systems. Cavity Drainage Membranes. Basement and Cellar waterproofing.

Published [16/10/2020]File size [3394 KB]

Newton CP Pumps Technical Data Sheet 3.0
The Newton CP150, CP250, CP400 and CP750 are a range of high quality clean water pumps ideally suited for the removal of ground water from basements and cellars as well as surface water collected in light-wells, patios and terraces.

Published [18/12/2020]File size [457 KB]

Newton Damp Proofing Or Waterproofing Identifying The Correct Solution

Published [10/01/2017]File size [945 KB]

Newton DampSafe / NewCoat DPM Damp Tolerable DPM Tech Data Sheet 1.0
Damp Tolerable Primer For Non-Porous Surfaces. Priming of damp, non-porous concrete and screeds to provide a DPM and vapour barrier. Concrete Primers.

Published [15/10/2021]File size [716 KB]

Newton Fibran XPS 500-C TDS 2.1
Closed-Cell Slotted Insulation Board

Published [15/10/2021]File size [559 KB]

Newton HydroBond Installation Guide 5.1
Newton HydroBond System Externally Applied Waterproofing System

Published [15/10/2021]File size [2684 KB]

Newton Insulation as a Spacer in Type C Systems
Closed-cell insulation correctly used as the spacer within a Type C cavity drain membrane waterproofing system

Published [05/11/2018]File size [5191 KB]

Newton NP400PP Puddle Pump Data Sheet 1.1

Published [08/10/2021]File size [789 KB]

Newton PAC 500 System Overview 2.3
POSITIVE AIR CURTAIN, Waterproofing & Ground Gas Mitigation

Published [15/10/2021]File size [2018 KB]

Newton System 500 Ancillaries TDS 2.3
NUSEAL PLUGS, HELIFIX WALL TIES, INSULATION FIXINGS, WATERSEAL TAPE and ROPE, NEWTON OVERTAPE, Waterproof Joist Liners, Waterproof Pipe Slevers.

Published [15/10/2021]File size [997 KB]

Newton System 500 Cavity Drain Waterproofing Brochure
Waterproofing membranes DPC basement tanking membrane cavity drain radon protection

Published [03/05/2016]File size [583 KB]

Newton System 800 Ancillaries Data Sheet 2.0-1
Plugs, Fixings, Tapes, Sealants, Box Liners, Joist Liners, Pipe Sleeves for Newton System 800 Damp Proofing.

Published [16/10/2020]File size [650 KB]

Newton System 800 Brochure
Waterproofing membranes DPC basement tanking membrane cavity drain radon protection

Published [27/10/2017]File size [2813 KB]

Newton Titan Pro Data Sheet 5.4
Pumping System for Newton CDM System, Packaged Sump Systems.

Published [16/10/2020]File size [1050 KB]

Newton Victron Inverters Tech Data Sheet 4.0
Advanced Battery Backup Systems

Published [15/10/2021]File size [980 KB]

Newton Waterproofing Technical Paper - Basement Drainage Solutions
basement drainage solutions

Published [05/11/2018]File size [9429 KB]